Data Sheet F-001 
Low pass filtergalvanically isolated from the line connector
housing connected to signal ground
Cut-off frequency:customer specific from 10 Hz to 10 MHz
Filter characteristic:8th order Butterworth
Offset voltage:< ±0.1 mV
Nonlinearity:< 10-4
Input connectors:• BNC
• 14-pin Lemosa socket for external EC-Tec electrometer modules and bipotentiostat input / output
Input impedance:600 Ohm || 10 pF
Input voltage range:±10 V
Output connectors:• BNC
• 14-pin Lemosa socket for external EC-Tec electrometer modules and bipotentiostat input / output
Output drive capability:±200 mA: ±10 V at 50 Ohm
Output voltage noise:< 20 nVrms Hz-1/2
Power supply:96-pin DIN 41612 connector at rear side
pin 24c / 28c: 220 V ~ / 115 V ~

F-001 filter characteristic for a cut-off frequency of 25 kHz:
(Aout/Ain is the ratio of output and input signal amplitude)
This page last updated on Apr 2, 2004